All services, prices, and products offered are subject to change based on market availability and technician evaluation.
Set-Ups
Our Full Set-up includes full diagnostics and inspection of the entire instrument, full inspection of all electronics, personalized recommendations for upgrades and improvements, full redress and polish of frets with 7 courses of fine sandpapers and micromesh with a complete high gloss buff on our arbor buffer, cleaning and oiling of fret board, tightening hardware, replacing any needed small parts or screws, restring, adjusting and polishing nut slots, lubricating truss rod nut (if needed), full truss rod adjustment, balancing tremolo or setting tailpiece, adjusting saddle height, setting intonation using even temperament methods, checking electronics, adjusting pickups, detail polish and cleaning.
STANDARD GUITARS: $79- (Hard Tails, Les Pauls, Teles, Basic 4-string Basses, Ukulele, Acoustic 6-strings, Classical Acoustics, Stratocaster style guitars, Guitars with Bigsby’s, 7-string electrics, 5-string Basses, Resonators) ...with Fret Level, Re-crown & Polish: $149
- OTHER INSTRUMENTS & MORE COMPLEX GUITARS: $99
- Locking Tremolo Guitars (Floyd Rose trems), 12-string guitars, Latin Instruments, 6-string Basses, Banjos, Jaguars & Jazzmasters
- RICKENBACKER BASS OR 6 STRING GUITAR: $99
- (Includes double truss rod adjustment)
Restring & Clean: $20
(Remove old strings, clean fretboard and polish tops of frets, oil fretboard, tighten loose tuners and hardware, oil fretboard, stretch strings, tune to pitch, adjust any equipped tremolo or tailpiece and polish guitar. Cost of strings is not included.)
6-STRING, 7-STRING, BANJO & UKULELE: $20 ($15 for restring only)
12-STRING: $30 (With other work $20)
CLASSICALS, LATIN INSTRUMENTS & MANDOLINS: $35 (With other work $30)
FLOYD ROSE TREM EQUIPPED: $25 (With other work $20)
Add-Ons & Adjustments
- ADJUST ACTION OR INTONATION $20
- ADJUST TRUSS ROD $15
- BLOCKING ONE SIDE OF TREMOLO $30
- DOWEL AND DRILL STRAP BUTTON $30
- VERY DIRTY GUITAR OR RUSTY/FROZEN HARDWARE $40
- REMOVING STICKERS $10
- SADDLE INSTALLATION FOR STRAT STYLE $50
- PICK GUARD MOUNTING $30 - $50
- PICK GUARD MOUNTING, LP STYLE $15
- PICK GUARD MOUNTING, STRAT STYLE, DROP IN $40
Fret Work
Includes Fret leveling on the World Famous Dan Erlewine Neck Jig. This system allows for 100% leveling of frets on the jig with the neck in the “under tension” playing position. Once frets are leveled, they’ll be crowned to perfection, dressed on the edges, and polished to a high gloss with 1500 to 12,000 grit microfibers. Full Set-Up is included.
Unbound Neck = $300.00
Bound neck = $375.00
Bound Neck w/ Fret Nib Removal = $450.00 (You get more fret if you remove your Nibs!)
Bound Neck w/ Fret Nib Preservation & Restoration = $500 and up. (Usually reserved for 1950’s and 1960’s Gibson Guitars.)
Electric Bridges
- MOUNT NEW BRIDGE $20
- Tune-O-matic or Strat hard tail
- MOUNT NEW TREMOLO $50 - $80 (Strat Tremolo or Floyd Rose Style)
- MOUNT BASS BRIDGE $30 - $50
Guitar Electronics
- MINIMUM BENCH FEE OR DIAGNOSIS: $25
- HOLLOW BODIES ADD-ON $25- $75
- PICK UP INSTALLATION $50 (one)
- $65 Two
- $75 Three
PICK UP INSTALLATION ON TELE, BRIDGE: $65
PICK UP INSTALLATION ON TELE, NECK: $50
PICK UP INSTALLATION ON TELE, SET: $75
EMG INSTALL $100- 1 pick up, 2 pots, jack & battery
- Each additional $15
- 3 pick up Strat or Noiseless install $120
- Les Paul with 4 pots $150
ACOUSTIC PICK UP INSTALL, UNDERSADDLE: $75
SOUND HOLE PICK UP INSTALL $50
CLEAN ELECTRONICS- Top load (Strat style): $25
CLEAN ELECTRONICS- Back Load (LP style): $45
REPLACE POT: $50- Two pots $65
- Three pots $80
- Four pots $90
REPLACE SWITCH, LES PAUL STYLE: $55
REPLACE SWITCH, STRAT STYLE: $55
PUSH PULL POT INSTALL: $35
TAP SWITCH INSTALL (EVH Style): $35
Paint & Touch-up
Finish repairs are the hardest to price. All prices are subject to change. Each touch up must be evaluated by a tech at the Production Shop. Please allow 6-8 weeks minimum for all finish repairs and minimum 90-120 days for refinishes
Parker Work
Parker’s take a special know how to do properly. We offer absolutely no Parker Carbon Fiber body or neck repairs.